Setting The Phone Screen On Calling? Option; Setting The Call Timers Display - Avaya 4610SW User Manual

4610SW IP Telephone Options

Setting the Phone Screen on Calling? Option

When the Phone Screen on Calling? option is set to Yes, the Phone screen
appears in the display area when you make a call, regardless of the screen you
were working with at that time. You lose any unsaved work in progress (for
example, labeling a Speed Dial button) when the Phone screen displays. The only
exception is the Web Access application, which "remembers" the current web
screen.
When the Phone Screen on Calling? option is set to No, making a call has no
impact on the application screen displayed. The top display line, however,
provides an appropriate message. This is the default setting.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or
save this setting by pressing the Save softkey. (To restore the previous
setting without changing it, press the Cancel softkey.)
After saving or cancelling, the first Options Main screen displays.

Setting the Call Timers Display

Your 4610SW IP Telephone is capable of displaying two types of call timers. The
Call Timer displays in the top display area showing the elapsed time you are
connected on a call in h:mm:ss (hours:minutes:seconds) format. The Hold Timer
displays in the applicable call appearance area showing the elapsed time a call
has been on hold.
When the Display Call Timers? option is set to Yes, the Call Timer displays on
either the active call appearance line (if the Phone screen is displayed) or the top
display line (if a screen other than the Phone screen is displayed). Likewise, when
a call is on hold, the Hold Timer displays in the corresponding call appearance
area or the top display line, depending on whether the Phone screen is or is not
displayed. This is the default setting.
When the Display Call Timers? option is set to No, neither the Call Timer nor the
Hold Timer displays. Call time data is still maintained by the phone for Call Log
purposes.
1. To change this option, press the corresponding Line/Feature button.
2. Press the Line/Feature button for the next setting you want to change or
save this setting by pressing the Save softkey. (To restore the previous
setting without changing it, press the Cancel softkey.)
After saving or cancelling, the first Options Main screen displays.
Application Options
Issue 2.0 December 2003
6-5