If The Video Cd Has Playback Control - RCA RC5910P User Manual

Video CD Information Banner
1. Press INFO on the remote to bring up the Video CD's information
banner.
2. Press INFO a second time to turn it off.

If the Video CD Has Playback Control

If a disc is encoded with the playback control function, a menu
screen appears after the disc is loaded into the player.
1. Use the number buttons on the remote to select a track.
2. Press OK or PLAY to begin playback of the selected track.
3. Press CH + or CH – on the remote (SKIP FWD or SKIP REV on
the player) to scroll through the tracks.
4. Press GO BACK to stop playback and return to the menu or press
STOP to stop playback and remove the menu from the screen.
Bypassing Playback Control
If a Video CD has Playback Control, you can bypass the menu by
following these steps when you first load the discs.
1. Press STOP to put the player in the stop mode.
2. Use the number buttons on the remote to enter the desired track
number, and then press PLAY. When playback begins, the disc
will respond as if it is not in the Playback Control mode.
Resuming Playback Control
• To resume the Playback Control mode, press MENU.
Playing Video CDs
For More Information About Playback
Control
Check the instructions that accompany the
Video CD for more information on how to use
the playback control function for that specific
disc.
55