Table of Contents
Advertisement
All Hands in the Cookie Jar
All Hands in the Cookie Jar
Insert with the
label facing up.
If the Video CD Has Playback Control
If a disc is encoded with the playback control function, a menu screen
appears after the disc is loaded into the player.
1.
Use the number buttons on the remote to select a track.
2.
Press OK or PLAY to begin playback of the selected track.
4.
Press GO BACK to stop playback and return to the menu or press STOP
to stop playback and remove the menu from the screen.
Bypassing Playback Control
If a Video CD has playback control, you can bypass the disc's menu by
following these steps when you first load the discs.
1.
Press STOP to put the player in the stop mode.
2.
Use the number buttons on the remote to enter the desired track
number, and then press PLAY. When playback begins, the disc will
respond as if it is not in the Playback Control mode.
Resuming Playback Control
To resume the Playback Control mode, press MENU (the disc's menu
appears).
Chapter 4
To Load and Play a Video CD
1.
Press the OPEN•CLOSE button on the front of the DVD player.
2.
Place a disc gently into the tray with the disc's label facing up.
3.
Press OPEN•CLOSE or PLAY to close the disc tray.
The DVD player reads the disc's table of contents, and then displays the
playback control menu or begins disc playback.
4.
Press STOP to stop playback.
Playing Video CDs
41
Advertisement
Table of Contents
