Part10 Removal Procedure; Removal Procedure Of Indoor Unit - Gree GWH18AC-D3DNA1B Service Manual

10. Removal Procedure

10.1 Removal Procedure of Indoor Unit

Warning
panel
Remove
Push the convex parts
of the front panel, and then lift the front panel.
Unscrew the screws fixing the display cover and
pull out the plug.Forcibly lift the front panel up-
wards from the clasps to take it out.
Remove filter and
Top the middle section of air filter from the clasps
at both sides.Pull the air filter forward to remove
it.
Unscrew the 1 screw on press plate to open the
press wire board.
Remove swing louver
Push out the axile bush in the middle of
deflector . Then slightly bend the
remove it.
panel case
Remove
Unscrew the 7 tapping screws fixing the front
case, and turn the front case backwards to re-
move it.
Be sure to wait
off all power supplies before disassembling work.
on the left and right sides
wire-pressed clamp
air
air deflector to
for a minimum of
panel
filter
clasps
air deflector
55
Removal Procedure
10 minutes after turning
screw
display cover plate
wire-pressed clamp
axile bush
screws