Removal Procedure Of Outdoor Unit (18K Unit) - Gree GWH18AC-D3DNA1B Service Manual

Removal Procedure

10.2 Removal Procedure of Outdoor Unit (18K Unit)

1. top cover
Remove
Twist off the fastening screw used for fixing the handle,
pull it downward and then remove the handle.
Twist off the screws around the top cover, pull it
upward and then remove the top cover.
2. grille and right side plate
Remove
Twist off the screw around the grille and then remove
the grille.
Twist off the screws between right side plate and end
plate of condenser, valve support, pull it upward and
then remove the right side plate.
3. electric box
Remove
Disassemble the screws on electric box cover, pull out
the temperature sensor and then remove the electric
box.
Ensure don not contact control panel when removing
electric box cover, if not, electrolytic capacity will discharge
and lead electric shock or burn out control panel.
Warning Be sure to wait 10 minutes or more after turning
off all power supplies before disassembling work.
Top cover
Temperature sensor
58
handle
Screw
screw