Gree GWH18AC-D3DNA1B Service Manual page 65

Removal Procedure
4. Remove axial flow blade
Loosen the clamp nut with spanner, take out nuts,
spring washer, plain washer and then remove the
axial flow blade forcibly.
5. motor and motor support
Remove
Twist off the fixing screws and then take out the motor.
Twist oft the screws used for fixing the motor support,
pull it upward and then remove the motor support.
6. Remove four-way valve
Unsolder the spot weld between four-way valve and
other pipes and then remove the four-way valve
sub-assy.
clamp nut
motor support
tapping screw
four-way
valve
weld spot
62
axial flow blade
motor