Assembly Instructions - Worx WG166 Instructions For Use Manual

symBoLs
Warning
Read the manual
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Wear eye protection
Wear ear protection
10 10
To avoid possibility of electric
shock, do not use in damp or wet
conditions
Keep all other people, including
children, pets and bystanders
outside the 15 meters hazard zone,
stop the trimmer immediately if
you are approached.
2-in-1 Cordless Lawn trimmer / Lawn edge trimmer EN

assEmBLy iNsTruCTioNs

1. ASSEMBLy oF THE MAIN HANDLE
AND SHAFT (See Fig A)
Loosen the upper locking knob (3) clockwise.
Insert the telescopic shaft into the main
handle, until a click sound is heard (See Fig A).
Tighten the upper locking knob counter-
clockwise.
2. ASSEMBLy oF THE SAFETy GUARD
Fix the safety guard to the trimmer head
making sure the sides are located into the
grooves on the trimmer head (See B).
Secure the safety guard onto the trimmer
head with the screw provided (on the inside of
the guard).
3. ASSEMBLy oF THE SPACER GUARD
If the space guard is not mounted to your
trimmer model already, locate and snap fit the
pivot bracket of spacer guard into the hole of
trimmer head (See C).
When not required, rotate the spacer guard
to the underside opposite side of the safety
guard and clip into the two locations.
opEraTioN iNsTruCTioNs
NoTE: Before using the tool, read
the instruction book carefully.
1. CHARGING yoUR BATTERy PACK
wARNING: The charger and battery
pack are specifically designed to work
together so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because an electrical failure and hazard will
occur.
2. BEFoRE USING yoUR CoRDLESS
GRASS TRIMMER
When you charge the new battery or one which
has not been used for long periods of time, it
may not reach full charge until after you have
discharged it fully in use and recharge it several
times.