Assembly Instructions - Worx WG150E Manual

SYMBOLS
Read the manual
Warning
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Wear eye protection
Wear ear protection
10 10
To avoid possibility of electric
shock, do not use in damp or wet
conditions.
Keep all other people, including
children, pets and bystanders outside
the 15 meters hazard zone, stop
the trimmer immediately if you are
approached.
Cordless Grass Trimmer
CRA-WG150E-M-061102.indd 10

ASSEMBLY INSTRUCTIONS

1. ASSEMBLY OF THE MAIN HANDLE AND
SHAFT (See Fig A)
Loosen the upper locking knob (3) clockwise.
Insert the telescopic shaft into the main handle,
until a click sound is heard (See Fig A).
Tighten the upper locking knob anti-clockwise.
2. ASSEMBLY OF THE SAFETY GUARD
Fix the safety guard to the trimmer head making
sure the sides are located into the grooves on
the trimmer head (See B).
Secure the safety guard onto the trimmer head
with the screw provided (on the inside of the
guard).
3. ASSEMBLY OF THE SPACER GUARD
Locate and snap fit the pivot bracket of spacer
guard into the hole of trimmer head (See C).
When not required, rotate the spacer guard to
the underside opposite side of the safety guard
and clip into the two locations.
OPERATION INSTRUCTIONS
NOTE: Before using the tool, read
the instruction book carefully.
1. CHARGING YOUR BATTERY PACK
WA R N I N G:The charger and battery
pack are specifically designed to work
together so do not attempt to use any other
devices. Never insert or allow metallic objects
into your charger or battery pack connections
because an electrical failure and hazard will
occur.
2. BEFORE USING YOUR
GRASS TRIMMER
Your battery pack is UNCHARGED and you
must charge once before use. Your battery
pack will not be fully charged until you have
performed several charge and discharge
operations by charging & working with your
grass trimmer. After this your battery pack
performance will improve.
CORDLESS
ENG
2007-3-28 17:11:03