Appendices; Appendix A - Pvi 3000S, Pvi 4000S, Pvi 5000S, Pvi 5300 Data Sheet; Appendix B - String Sizing Tool; Appendix C - Contact Information - Solectria Renewables PVI 3000S Installation And Operation Manual

PVI 3000S, 4000S, 5000S, 5300 Series Inverters

10.0 Appendices

10.1 Appendix A – PVI 3000S, PVI 4000S, PVI 5000S, PVI 5300 Data Sheet
http://www.solren.com/downloads/PVI3000-7500_datasheet.pdf
10.2 Appendix B – String Sizing Tool
http://www.solren.com/stringSizing.html
10.3 Appendix C – Contact Information
Solectria Renewables LLC
360 Merrimack Street
nd
Building 9, 2 floor
Lawrence, Massachusetts 01843
USA
Tel:
Fax:
Sales/ general info:
Customer Support:
Website:
10.4 Appendix D – Authorized Distributors
See website for complete and updated listing:
10.5 Appendix E – Positive Grounding Option
See section 4.3 Connection of the DC wiring in the Wiring section for standard wiring for
negatively grounded systems and refer to it while connecting for positively grounded systems
using this appendix including use of all the warnings and cautions.
WARNING: For positively grounded systems, polarities of each DC input from a PV string
shall be correctly connected to the "Grounded Conductor" (positive) and "Ungrounded
Conductor" (negative) terminals respectively. The DC voltage must be less than 600V in
any condition.
The PVI 3000S-5300 inverter supports positively grounded arrays. To configure the inverter for
positive grounded arrays, the integrated disconnect must break the ungrounded, negative
conductor. If any inverter is ordered as negatively grounded, it can be "converted" to positively
grounded following these instructions:
Installation and Operation Manual (Rev A)
978.683.9700
978.683.9702
inverters@solren.com
service@solren.com
www.solren.com
www.solren.com
64