Com1; Serial Port Function - Bosch VideoJet X20 SN Installation And Operating Manual

74 en | Configuration Using a Web Browser
5.27

COM1

You can configure the serial interface parameters (orange terminal block) to meet your
requirements.
NOTICE!
If the VideoJet X20 SN is working in multicast mode (see Section 5.29 Multicasting, page 80),
i
the first remote location to establish a video connection to the unit is also assigned the
transparent data connection. However, after about 15 seconds of inactivity the data
connection is automatically terminated and another remote location can exchange
transparent data with the unit.
5.27.1

Serial port function

Select a controllable unit from the list. If you wish to use the serial port to transmit
transparent data, select Transparent. Select Terminal if you wish to operate the unit from a
terminal.
NOTICE!
i
After selecting a unit, the remaining parameters in the window are set automatically and
should not be changed.
V3.5 | 2007.12 Installation and Operating Manual
VideoJet X20 SN
Bosch Security Systems