Install Crank Handle For High Pressure Hose Reel/Cord Reel; Fill Up Detergent Tanks; Fill Up Tank For Nilfisk-Alto Antistone (Anti-Scale); Adjusting The Nilfisk-Alto Antistone (Anti-Scale) Device - Nilfisk-ALTO NEPTUNE 5 Operating Instructions Manual

NEPTUNE 5 / 7 / 8
english 3.3 Install Crank handle
for high pressure hose
reel/cord reel
3.4

Fill up detergent tanks

3.5 Fill up tank for Nilfisk-
Alto AntiStone (Anti-
Scale) indicator
3.6 Adjusting the Nilfisk-
Alto AntiStone (Anti-
Scale) device
B
mg/l Grains
0-17
17-60 1,1-3,5
60-128 3,6-7,5
128-180 7,6-10,5
>180 >10,5
6
A
O dH °e
0-1
0-7 0-8,8
7-14 8,8-17,5
14-21 17,5-26,3 25,1-37,6 151-300
>21 >26,3
A
B
°f ppm Ca
0-12,5 0-50
12,5-25,1 51-150
>37,6 >300
1. Pull cap of crank in arrow
direction.
2. Align tabs on crank with slot
in axle.
3. Put crank on axle of high
pressure hose reel/cord reel.
4. Fix crank by pushing the cap.
1. Fill up detergent tanks (A)
and (B) with prediluted detergent.
Capacity see chapter 9.3 Techni-
cal Data
1. Fill up Nilfisk-Alto Anti-Stone
(Anti-Scale)/water softener res-
ervoir with the sample bottle
provided. Nilfi sk-Alto AntiStone
(Anti-Scale) prevents any depos-
its of scale and acts at the same
time as a corrosion inhibitor.
For compatibility reasons, use only
the tested Nilfisk-Alto AntiStone
(Anti-Scale) which is available as a
six-pack of 1 liter bottles by ordering
part number 8466.
The Nilfi sk-Alto AntiStone device is
set at the factory to a water hardness
of class 2. Adjustment:
1. Open cabinet (A) and service
door (B).
2. Only on ..X2 models: remove
crank.
3. Measure the water hardness or
ask your water supply company.
4. Set the adjusting knob to re-
quired position.
Description
NEPTUNE 5
Soft 0
Slightly Hard 1
Moderately Hard 2
Hard 3
Very Hard 4
1) Options / model variants
Setting
NEPTUNE 7/8
0
1-2
2-3
3-4
4