Table of Contents
Advertisement
4.4.2 ERGOpor seat element
The ERGOpor-seat element is a firm plas-
tic shell with removable cushion.
4.4.2.1 Detaching the ERGOpor
seat element
The seat element is detached by slack-
ening the screws (fig. 21.1/
) on both
sides and pushing the clamps inwards
(fig. 21.1).
4.4.2.2 Attaching the ERGOpor
seat element
First press the seat element onto the
frame (fig. 21.2).
The fixing screws
are located be-
tween the plating brackets
.
Then push the clamps (fig. 21.2/
outwards under the frame tubes and
tighten the screws (fig. 21.3/
).
4.4.2.3 ERGOpor-seat cushion
The ERGOpor seat cushion (fig. 21.4/
is secured to the seat shell with Velcro
fasteners and can be pulled off.
20
1
21.1
2
3
)
21.2
)
4
1
21.3
21.4
4.5 Seat inclination
4.5.1 Adjustment of the seat
inclination
Depending on the model the inclina-
tion of the seat is either adjusted by
pressing the foot activation lever (fig. 22/
) down or the hand lever (fig. 22.1/
) activated.
Attention:
Inclination of the seat raises the dan-
!
ger of tilting on should only be done
with mounted support wheels!
1
1
22
1
22.1
21
Advertisement
Table of Contents
