Table of Contents
Advertisement
5. Optional acces-
sories
Options are not a part of the standard
scope of supply.
Remark:
Options from other companies can
cause malfunctions.
– The retrospective assembly should
only be done by an authorised spe-
cialised workshop!
5.1 Lateral supports
The lateral supports (fig. 33/
) increase
the sitting stability and can be adjusted
in height and swivelled to the rear.
5.1.1 Setting the height
The lateral supports can be suitably po-
sitioned after the locking screws (fig. 34/
) have been slackened. Retighten the
clamping screws after positioning.
5.1.2 Setting the depth
After loosening the four screws (fig. 34/
) the side support can be positioned
accordingly. After positioning, retighten
the screws.
26
1
33
2
3
34
35
5.1.3 Swivelling the lateral sup-
ports to the rear
The lateral supports can be swivelled to
the rear. After they have been pulled
up out of the locking device (fig. 35).
5.2 Splay wedge
The necessary retainer for the splay
wedge can be subsequently mounted
underneath the surface of the seat (fig.
36).
5.2.1 Setting the depth
After loosening the clamping screw (fig.
36/
) underneath the front surface of
the seat adjust the splay wedge to the
personal demands of the user and
retighten the clamping screw (fig. 36/
).
Attention:
Only pull out the splay wedge so far
!
that the splay wedge rail for depth
adjustment finalises with the splay
wedge retainer!
5.2.2 Setting the height
After loosening the clamping screw (fig.
37/
) adjust the splay wedge to the
personal demands of the user and
retighten the clamping screw (fig. 37/
).
2
36
1
37
27
Advertisement
Table of Contents
