Table of Contents
Advertisement
SD Card
Four SD cards can be inserted into four slots
behind the security door on top of the DVR.
The Observer 2100 requires Class 10 (often also
labeled "Full HD") SD cards to properly record
video. Only use SD cards supplied by Safety
Vision.
The Observer 2100 can accept four SD cards up
to 32 GB for a total capacity of 128 GB.
Use the following procedure to access, remove
and insert SD cards:
1.
Insert the key and turn it 90° clockwise to
open the security door.
2.
Insert cards straight in as illustrated, with
the label facing the front on the DVR
Monitor.
3.
Lightly push down on the SD card until a
"click" is felt, then release.
4.
Insert SD cards into the slots in sequence,
with the first card in Slot 1, the second in
Slot 2, and so on.
5.
Close the security door and turn the key
90° counter-clockwise to lock it.
To remove an SD card:
1.
Lightly push down on the SD card until a
"click" is felt, then allow it to spring out of
the slot.
The SD card partly ejects.
2.
Pull the SD card straight out.
Once removed, insert the SD card into an SD
card reader connected to a computer. The
computer recognizes the SD card as an external
storage device.
OBSERVER 2100 USER GUIDE
7
7
Advertisement
Table of Contents
