Page 2
Safety Vision reserves the right to amend the information in this document at any time without prior notice. This material is confidential and the property of Safety Vision. It is shared with your company for the sole purpose of helping you with the operation of the described equipment.
56BA-AHD/70BA-AHD USER GUIDE TABLE OF CONTENTS OVERVIEW BEFORE YOU START SUPPLIED HARDWARE HARDWARE COMPONENTS INSTALLATION WIRING INITIAL SETUP Camera 2 Input SYSTEM OPERATION System Power APPENDIX A: SPECIFICATIONS CLIENT SUPPORT TECH SUPPORT FCC COMPLIANCE STATEMENT...
56BA-AHD/70BA-AHD USER GUIDE OVERVIEW Supporting up to two cameras, the Safety Vision 56BA-AHD (5.6-inch screen) and 70BA-AHD 1080p monitors provide views of a single blind (7-inch screen) spot or multiple for full coverage. The compact flat screen monitors take minimal space while providing you with a clear view of your most vulnerable areas.
SV-LCDBBRKY • (monitor mount) Five M3 x 12 Phillips drive, washer head self drilling screws • roll of black tape • 56BA-AHD/70BA-AHD monitors purchased as part of a SV-LCD56BA-AHDP or SV-LCD70BA-AHDP kit, will also seperately include: SV-LCDBA3.7M power cable •...
56BA-AHD/70BA-AHD USER GUIDE HARDWARE COMPONENTS POWER LED — Indicates that POWER/CAM SELECT BUTTON the monitor has power. — Press and hold for 1 second to turn the monitor on or off; DAY/NIGHT SENSOR — press briefly to switch image Senses available light and input.
56BA-AHD/70BA-AHD USER GUIDE INSTALLATION Select a mounting surface for the monitor, which can be mounted overhead or elsewhere in the vehicle cabin (including on the floor or console). The mounting surface should: Be level, waterproof, ventilated adequately, and capable of •...
Page 8
56BA-AHD/70BA-AHD USER GUIDE (Installation cont.) Slide the monitor onto the mounting bracket to the desired height and tighten the locknut to secure the monitor to the mounting bracket. Adjust the monitor horizontally and vertically, then tighten the handle screw to lock the monitor into position.
56BA-AHD/70BA-AHD USER GUIDE WIRING Connect the 13-pin DIN connector on the wiring harness to the 13-pin DIN connector on the monitor cable. Connect the camera extension cable to the connector labeled as “Camera 1” on the wiring harness. Connect the individual wires on the wiring harness as follows:...
Adjusts the brightness intensity level VOLUME Adjusts the volume of the integrated speaker Camera 2 Input By default the 56BA-AHD/70BA-AHD monitors are set to receive one camera input only. (Camera 1) To configure the monitor to receive two inputs, ensure a second camera...
56BA-AHD/70BA-AHD USER GUIDE The monitor is sensitive to the timing that the buttons are pressed. If at first TO B2 RESET does not appear on the screen, try again, pressing the buttons more slowly and consistently. (or more quickly) When the monitor is powered up again, press the...
56BA-AHD/70BA-AHD USER GUIDE CLIENT SUPPORT The Client Support team serves as the voice of Safety Vision; ensuring an optimal experience through the entire client relationship. They interact with every department in the company to accommodate your needs and deliver on every inquiry or request. Whether you want to place an order, would like more information on a product, or anything in between;...