Fcc Compliance Statement - Safety Vision OBSERVER 2100 User Manual

Limited 1-Year New Product Warranty
Safety Vision, LLC ("SV") makes the following limited
warranty, which is effective at the time of the original end-
user purchase.
Note: Optional warranty products are available for all SV
products and may be purchased at the time of the original end-
user purchase or any time during the original Limited 1-Year
New Product Warranty period.
SV warrants this product against defects in materials for
a period of 1 year after the date of purchase. During this
period, SV will repair or replace a defective product or part
without charge to the customer. The customer must send
the defective product or part to SV or an authorized SV
dealer. The customer must pay for all transportation and
insurance charges for sending the unit to be repaired. SV's
total liability is limited to the original product cost.
User Guide
The customer should thoroughly read this guide before
operating this product.
Customer's Responsibility
The above warranty is subject to the following conditions:
• Customer must notify SV within 10 days of discovering
the defective product or part and provide a description
of the defect and complete information about the
manner of its discovery.
• All warranty servicing of this product must be
performed by SV or an authorized servicing agent.
• Warranty extends only to defects in materials as limited
above. Warranty does not extend to any product or
part that has been lost or discarded by the customer;
to damage to products or parts caused by misuse,
accident, improper installation, improper maintenance,
or use in violation of instructions furnished with the
product; to units that have been altered or modified
without authorization of SV; to damage to products or
parts thereof that have had the serial number removed,
altered, defaced, or rendered illegible; or to any failure
of the product to function caused by burglary, fire,
flood, war, riot, civil commotion, Acts of God, or any
other condition beyond the control of SV.
Obtaining Warranty Service
To obtain warranty service, the customer must contact
the SV Service and Warranty Manager at 713.896.6600 or
800.880.8855 to report a defective product. (The customer
must report the model number and serial number if
available.) The Service and Warranty Manager will assist in
troubleshooting the problem and, if necessary, issue a return
material authorization (RMA) number. The customer must
include this number on the outside of each package shipped
to SV.
OBSERVER 2100 USER GUIDE
Important Packing and Shipping Instructions
When a product requires service, only the affected
component must be returned. The customer must use
proper packing material to ensure against damage during
shipping. Any shipping damage caused by improper packing
is not covered under this warranty. In addition, the customer
must include a return material authorization (RMA) number
on the outside of each package shipped to SV and a letter
explaining the defect with the product.

FCC Compliance Statement

This device has been tested and found to comply with the
limits for a Class B computing device, pursuant to subpart B of
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
Operation of this equipment in a residential area is likely to
cause interference, in which case the user at his/her own
expense will be required to take whatever measures may be
required to correct the interference.
Any changes or modifications in construction of this device
which are not expressly approved by the party responsible
for the compliance could void the user's authority to operate
the equipment.
29
29