Safety Vision OBSERVER 2100 User Manual page 20

19
OBSERVER 2100 USER GUIDE
19
Parking Lines Setup
Parking Lines Setup allows you to configure parking
guidelines to appear as an overlay over the camera image
when one of the four triggers is active. For each trigger,
select or deselect the Display option to turn the parking
lines on or off. Then tap the Calibration option to show how
the lines are displayed. Use the arrow keys to move the
position of the lines, then tap OK to save.
Additionally, select between Thin or Thick parking lines.
Dimmer (On/Off)
Turn the Dimmer on to automatically adjust screen
brightness due to environmental conditions as detected
by the ambient light sensor on the front panel. Turn the
Dimmer off to maintain screen brightness as set in the
Screen Adjustments option.
Trigger Delay Time (0-9 seconds)
For each trigger, use the ^ and v buttons to select between 0
and 9 seconds of delay when it becomes active.
Album (Off/3 sec/5 sec/10 sec/30 sec/1 min)
Select the time each image is displayed in the slideshow
that appears when viewing captured images in Player mode.
Select Off to turn the slideshow feature off (necessitating
manually advancing through selected images).