To install using an LPR Port Connection:
Printer Installed Successfully
to install additional printers and then click
dialog box appears.
to complete the installation, and click
The installation of the printer is now complete. If prompted, restart your system.
When the printer has a built-in network interface, you can print over a network using an LPR
port. This section describes how to install the printer driver when the computer and printer are
connected using a LPR port connection.
1 Ensure both the computer and printer are turned off.
2 Connect to the computer and printer using a network cable. Once connected, power on both
Ensure the printer is ready to print (remove packing materials, insert paper
and any toner or ink cartridges) before connecting the cable.
For further details on connecting using a network cable, refer to the printer's
If the Welcome to the Found New Hardware Wizard dialog box appears,
3 Insert the Kyocera Software Library CD-ROM into the CD drive.
dialog box displays. Choose from one of the following