Offset - Kyocera Extended Driver User Manual

Offset

N
OTE
Using the Offset
document is printed that has a total of 58 pages, the print job will be split into two
separate stapled sets of 50 and 8 pages.
5 Click to return to the
OK
6 The final printed document is stapled by the finisher and delivered to the output tray. For
further details about stapler specifications, refer to your supplied finisher Operation Guide.
The stacks each printed document by shifting from right to left as it is delivered to the
Offset
output tray.
Output direction
is available on printers with a supported finisher (optional) installed.
Offset
After installation, optional equipment must be recognized by the printer driver (device
settings). For further details, refer to
and cannot be used simultaneously.
Offset Staple
1 From the application's
be printed.
2 Click in the
Properties
3 Click the tab in the
Output
dialog box, and click
Print
Installing Optional Devices
dialog box, specify the number of copies of the document to
Print
dialog box. The
Print Properties dialog box appears
dialog box.
Properties
91
Using Optional Equipment
to start printing.
OK
on page 30.
.