Network Connection - Kyocera Extended Driver User Manual

Network Connection

N
OTE
N
OTE
To install using a Network Connection:
N
OTE
N
OTE
The installation of the printer is now complete. If prompted, restart your system.
This section describes how to install the printer driver when connecting to a network printer.
For further details on connections using other network protocols, consult the
configuration guide supplied with your network interface card.
The KPrint utility must be installed in order to connect to a network printer. For
further details, refer to the supplied Kyocera Software Library CD-ROM.
1 Ensure the computer and printer are turned off.
2 Connect to the computer and printer using a network cable. Once connected, turn on both
devices.
• Ensure the printer is ready to print (remove packing materials, insert paper
and any toner or ink cartridges) before connecting the cable.
• For further details on connecting using a parallel cable, refer to the printer's
Operation Guide.
If the
Welcome to the Found New Hardware Wizard
•
.
Cancel
3 Insert the Kyocera Software Library CD-ROM into the CD drive.
Once the installation program launches, the
If the installation program fails to launch after inserting the CD-ROM into the CD
drive, navigate to Windows Explorer, access the CD-ROM, and double-click the
Setup.exe file.
License Agreement
14
dialog box displays, click
dialog box displays.