Chapter 4 Using Optional Equipment
This section describes useful functions of the printer driver.
The properties boxes described here may differ from those for your printer.
The Staple feature is available on printers with an optional finisher installed. If a booklet
stitcher unit is installed, the Booklet Printing feature is available. For further details, refer to
on page 102.
After installation, optional equipment must be selected by the printer driver (device settings).
For further details, refer to
Printed documents can be stapled in the positions shown below.
Staple and Offset features cannot be used simultaneously.
When the paper size is
order to staple the
page 50 in step 8 in the
Basic Printing Tasks
Installing Optional Devices
corner. For further details, see the explanation on
on page 30.
must be set to