Changing Network Discovery Settings; Initial Connection - Kyocera TASKalfa 650c Operator's Manual

Changing Network Discovery Settings

When using Document Monitor and connecting to your printer for the first time, or when registering an additional printer,
you need to find the device on the network.
P.21 "Connecting to same series MFP"
P.31 "Registering additional printers"
The search process may take long especially when many clients exist on the network. In this case, you can narrow down
the search conditions on the Discovery Settings dialog box. The settings available for change vary between the following 2
cases:
P.51 "Initial Connection"
P.52 "Additional Printer Registration"

Initial Connection

If you are trying to establish the connection to the device for the first time, click [Advanced] on the [Local Discovery] dialog
box and, on the [Discovery Settings] dialog box that appears, change the following settings:
1
2
3
1) Devices
Click the arrow button to display the pull-down list box and check the box for the model name that you want to search
for.
2) Network
Enable IPX/SPX Search
Select this option to search for the devices on the IPX/SPX network. This option is available when both of the following
conditions are satisfied:
- The IPX/SPX protocols and Novel Client are installed to your computer.
- Your computer is connected to the NetWare server.
The same series MFPs can be discovered in the IPX/SPX network if the [Local Discovery] dialog box is displayed from
other than Document Monitor.
Enable TCP/IP Search
Select this option to search for the devices on the TCP/IP network. This option is available only when the TCP/IP
protocols are installed to your computer. When you select this option, you also need to specify the detailed search
conditions for the devices on the network.
- Search local subnet — Select this option to search for devices in the local subnet.
- Specify a range — Select this option to search for printers in a specific range of IPv4 or IPv6 addresses. When
this is selected, select IPv4 or IPv6 and enter the IP addresses in the [From] and the [To] boxes.
3) [SNMP Settings]
Click this button when you need to verify and/or change the SNMP settings.
P.53 "Changing SNMP Settings"
The SNMP settings cannot be set when the [Local Discovery] dialog box displayed from Printer Drivers, N/W-Fax
Driver, and Document Monitor.
7 ADVANCED SETTINGS

Changing Network Discovery Settings

51