Adjusting Color; Color Mode - Kyocera Extended Driver User Manual

Half Tone Screen Settings

Adjusting Color

Color Mode

To adjust color settings:
1 Click Halftone Screen...
dialog box appears.
Settings
2 Clear the
Use Printer's Default Screens
3 Select from the list for each item, or enter values into the boxes to make settings. Refer to
the options and descriptions listed below.
Options
Ink
Frequency
Angle
Shape
Use Accurate Screens
4 Click to save the settings.
OK
You can adjust attributes of text and graphics for your color printouts.
You can switch between printing in
Custom mode allows you to select the desired effects including
,
Replacement Continuous Tone
table below.
Definitions
1 From the Print dialog box of the application, access the printer
in the
Properties Print
2 In the dialog box, click the
Properties
on the Graphics Settings
check box.
Descriptions
Determines the color used for the printed output.
Set the number of lines and units for halftone dots. The units are lines/
cm or lines/inch. Enter a value in the Frequency box, and select the
units from the list to the right.
Determines the halftone dot angle. The setting can range from 0.0 to
180.0 degrees.
Set the dot shape for halftones.
Choose from: Ellipse, Round, and Line.
Fine adjusts the set values to ensure an accurate number of lines and
halftone angle.
and
Color (CMYK)
, , and
Gloss Mode
dialog box opened from the
tab.
Color
78
dialog box. The Halftone Screen
modes. Specifying
Monochrome
Gray Component
. Refer to
Monochrome Color Mode
Properties.
menu.
File
Select