Kyocera Extended Driver User Manual page 124

The features are listed below:
Jobs are managed internally with job IDs and printed after saving by an application (KM-
•
NETJob Manager).
Barcode Print Output is supported and facilitates future printing with an optional barcode
•
reader.
Both types of jobs are saved on the hard disk, up to the user-defined capacity. However,
•
temporary jobs are automatically deleted if the defined capacity is reached. Permanent jobs
remain saved until removed by the user.
Printing and Saving Temporary and Permanent Jobs
Check that your printer has an optional hard disk installed.
N
OTE
1 From the application's
menu).
2 Open the
Properties
3 Click
Job Settings...
4 Select the
Job Storage (e-MPS)
5 When printing a job with a job ID barcode, open the
the appropriate settings.
For further details, refer to
N
OTE
Click to return to the
OK
on the hard disk as either a temporary or permanent job.
To reprint temporary or permanent jobs, the dedicated KM-NET Job Manager
utility is required.
For further details, refer to
N
OTE
on page 121.
Print dialog box, access the
dialog box, and click the
to access the
Job Settings
check box. Select
Printing Additional Copies of Saved Jobs
dialog box. While printing, the job will be simultaneously saved
Print
Using KM-NET for Clients to Print Saved Jobs Again
120
Properties . (Select
tab.
Output
dialog box.
or
Temporary Permanent
dialog box and make
Barcode Option
on page 122.
Print from the File
.