Kyocera Extended Driver User Manual page 65

When using a network port, select
Compatibility Settings
cannot be used on a network port in Windows 9x.
To print on both sides, follow these steps:
1 In the
Media
2 In the Layout
3 Select
Flip on Long Edge
4 Select
Print Instructions
placing the pages back into the cassette after the first side is printed.
- OR -
Clear
Print Instructions
5 Click in the Properties dialog and Print dialog.
OK
The even-numbered pages will be printed.
6 When printing stops, remove all printed sheets from the output tray.
With
Flip on Long Edge
into the cassette.
With
Flip on Short Edge
into the cassette.
7 Click OK in the
The odd-numbered pages will be printed.
Enable Manual Duplex on Network Port
dialog box, accessed from the
tab, select Cassette 1.
tab, select Print on Both Sides (Manual Duplex)
or
Flip on Short Edge
to print an instruction sheet. Follow the printed instructions for
and follow steps 5-7.
selected, turn the stack over on the long edge and put the pages
selected, turn the stack over on the short edge and put the pages
Manual Duplex Instruction
61
Printing from Applications
tab. Manual Duplex
Device Settings
.
.
dialog box.
in the