Rotate Collate; Job Settings - Kyocera Extended Driver User Manual

Rotate Collate

Using Rotate Collate

Job Settings

The Rotate Collate stacks the sets produced in the top tray in alternating orientations.
This function is available when printing using A4, B5, and letter size paper. During printing,
the same size paper must be loaded into two separate paper cassettes. For example, Portrait
(A4) and Landscape (A4-R) would be used when printing onto A4 paper. The MP tray can also
be used as a paper source.
This function requires a hard disk installed in the printer or a RAM Disk. For further details on
Hard Disk settings, refer to
1 Access the Properties
2 From the list, select
Output to
3 Enter the number of sets to be output in the
of the document being printed must not exceed the tray capacity.
4 Select the and
Collate
5 Click to return to the
OK
document sets are delivered in alternating horizontal and vertical orientation.
The Job Settings option is available when you install an optional hard disk or a RAM disk on
the printer. For further details on hard disk installation and setup, refer to
on page 33. Private print
RAM Disk Settings on page 33.
and click the Output tab.
Top Tray (Face-down)
Copies
check boxes.
Rotate Collate
dialog box, and click
Print
and Proof and Hold can be used with a RAM Disk.
108
.
box. The number of pages for all copies
to start printing. The collated
OK
RAM Disk Settings