Table of Contents
Advertisement
9
Approvals, Regulatory Compliance
Section 9 – Approvals, Regulatory Compliance
9.1 FCC (Domestic Use)
For United States: FCC ID: OUR-XBEEPRO
For Canada: IC #4214A-XBEEPRO
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1.) This device may not cause harmful interference.
2.) This device must accept any interference received, including interference that
may cause undesired operation.
9.2 FCC International Usage and CE Marking
Model: UWPC-2NEMA is CE marked.
9-1
ll approvals outlined in this manual are based on testing
that was done with antennas that are supplied with your
Wireless Series System Components. Removing and or
installing a different antenna will void the product compliance
demonstrated in these documents.
To satisfy FCC RF exposure requirements for mobile
transmitting devices, a separation distance of 20 cm or more
should be maintained between the antenna of this device and
persons during device operation. To ensure compliance,
operations at closer than this distance is not recommended.
The antenna used for this transmitter must not be co-located
in conjunction with any other antenna or transmitter.
It is your (the user's) responsibility to insure that these
products are operated within the guidelines here in this
manual and in conformance with all local, state, federal or
national regulations and laws of the country they are being
operated in.
Transmitting Power —Your wireless end device has been
designed, manufactured and tested so that the transmitting
power of your connector transmitter will not exceed 10 dBm
10 mW.
NOT :
W RNING:
NOT :
Advertisement
Table of Contents
