Fcc Compliance And Requirements; Federal Communications Commission (Fcc) Notice; Om-Cp-Rf Series Operations Manual; Omega Engineering, Inc - Omega OM-CP-RF Series User Manual

FCC COMPLIANCE AND REQUIREMENTS

Omega's OM-CP-RF series products operate in an "unlicensed" operation band, meaning
the end-user does not need to do anything special (such as obtain a license) to legally make
use of the product. Omega has performed all the required testing and certification to ensure
that these products meet the requirements for unlicensed operation outlined in 47 CFR Part
15.231 of the FCC rules. However, the user must understand and adhere to the following
notes and guidelines:
Any user changes or modifications that are not expressly approved by Omega
Engineering, Inc. may void the user's authority to operate the device per FCC code,
section 15.231.

FEDERAL COMMUNICATIONS COMMISSION (FCC) NOTICE

The following FCC IDs are associated with the devices covered by this manual:
PRODUCT
OM-CP-RFTemp101A
OM-CP-RFRHTemp101A
OM-CP-RFTC4000A
OM-CP-RFRTDTemp101A RUYBOARDRF
OM-CP-RFpHTemp101A
OM-CP-RFVolt101A
OM-CP-RFProcess101A
OM-CP-RFPulse101A
The following statement applies to all of the devices covered in this manual:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of more of the following measures:
▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
▪ Consult the dealer or an experienced radio/TV technician for help.

OM-CP-RF Series Operations Manual

Omega Engineering, Inc.

FCC ID
RUYBOARDRF
RUYBOARDRF
RUYBOARDRF
RUYRFPHTEMP
RUYBOARDRF
RUYBOARDRF
RUYBOARDRF

Revised 04/07/05

TRADE NAME
Omega Engineering, Inc.
Omega Engineering, Inc.
Omega Engineering, Inc.
Omega Engineering, Inc.
Omega Engineering, Inc.
Omega Engineering, Inc.
Omega Engineering, Inc.
Omega Engineering, Inc.
Page 17 of 18