Penmount Dos Driver Functions - Advantech FPM-3150TVE Series User Manual

"PENMOUNT" directory can also be applied.
Now, the PenMount DOS driver is installed.
A.3.4.6 PenMount DOS driver functions
There are several functions in the PenMount DOS driver. The user is
able to change the settings of the following utilities:
??Show Current Setting
A.The current setting data could be found from PM.BAT file.
B. The procedure to get the status is C:\PENMOUNT\PM
C. Choose "2" SHOW CURRENT SETTINGS
??Bep Sound Onor Off
A.Beep sound is able to set ON or OFF with parameter.
B. Enable Beep Sound command is
C:\PENMOUNT\PMOUSE /S.
C. Disable Beep Sound (Default) command is
C:\PENMOUNT\PMOUSE.
? Getting current touch's data
A.To get the touching data, use "PMGET.EXE" utility. This utility is
only available for COM 1 or COM 2 port.
C:\PENMOUNT\PMGET <COM port> <baud rate>
B. User will see the touching point address in the pop-up window.
26 FPM-3150TVE User's Manual