Configure The Gateway - Emerson Smart Wireless Gateway 1410 Reference Manual

Reference Manual
00809-0200-4410, Rev BA
2.3.3

Configure the gateway

It is now possible to log into the Gateway for the first time and begin configuration for
placement on a live control network. The following items need to be configured:



Use the following procedure to log in to the Gateway:
1.
2.
3.
4.
5.
The web browser will now be directed to the Gateway's default home page. There is a navigation
menu located on the left hand side with four main areas.




Security passwords
There are four role based user accounts for the Gateway with varying levels of access.
below describes this access.
Table 2-2. Role Based Access User Accounts
Role
Executive
Operator
Maintenance
Administrator
Initial Connection
Security Passwords
Time Settings
TCP/IP Network Settings
Open a standard web browser.
Enter https://192.168.1.10 in the address bar.
Continue though the security message.
Enter admin for User Name.
Enter default for the Password.
Diagnostics: View status of communications, client server parameters, and more
Monitor: Screens created by the user to view data from field devices
Explorer: Basic view of values from field devices
Setup: Configure the Gateway for operations, security, and host system integration
User name Web interface access
exec Read-only access
oper Read-only access
maint Configure HART
Configure Modbus communications
Configure Modbus register mapping
Configure OPC browse tree
Configure Active Advertising
admin Includes all maintenance privileges
Configure Ethernet network settings
Configure WirelessHART network settings
Set passwords
Set time settings
Set home page options
Configure custom point pages
Restart applications
Section 2: Initial Connection
®
device settings
February 2014
Table 2-2
9