Emerson Smart Wireless Gateway 1410 Reference Manual page 21

Reference Manual
00809-0200-4410, Rev BA
Request the following configuration items from the network administrator:





Obtaining an IP address from a DHCP server is not recommended, since the Gateway operation
will be dependent on the availability of the DHCP server. For maximum Gateway availability it is
best practice to specify an IP address.
To change the TCP/IP Network Settings:
1.
2.
3.





4.
5.
6.
7.
Note
Once the IP Address of the Gateway has been changed, communications to the web interface
will be lost. Restart the web browser, then log back into the Gateway using the new IP address
and other TCP/IP network settings. The PC/Laptop TCP/IP network settings may need to be
changed. During a Restart Apps the wireless network will be temporarily lost.
Initial Connection
Hostname
Domain Name
IP address
Netmask
Gateway
Navigate to Setup>Ethernet protocol.
Select Specify an IP address (recommended).
Enter the following:
Hostname
Domain Name
IP Address
Netmask
Gateway
Choose Submit.
When prompted, choose Restart Apps.
Chose Yes to confirm restart.
Close the web browser.
Section 2: Initial Connection
February 2014
13