Table of Contents
Advertisement
HOW TO USE THE BMI FEATURE
1.
Press the Adult mode On/Off button.
2.
Make sure the display is showing . . If not, press the Tare key.
3.
Press and hold the Hold/BMI key.
The display will momentarily show #! and then change to show the last height. Note
4.
that the BMI annunciator will be turned on and that the height value will be flashing
5.
Enter the new height by pressing the ( + ) key to increase the value or by pressing the
( – ) key to decrease the value.
NOTE! Press and hold the ( + ) or ( – ) key to change the rapidly change the value.
6.
When the correct value for the height is displayed, press the Hold/BMI key.
The display will change to show #! and the Hold annunciator will be blinking.
7.
8.
Have the patient step on to the scale.
9.
The scale will show the weight and then change to show the BMI value alternating
between the weight and BMI value.
10. Press Hold/BMI button to return the normal weighing mode.
11. The patient can now step off the scale.
SETTING THE AUTO-OFF TIME
1.
Press either the Adult or the Baby mode On/Off key.
Press and hold the Tare key until the display shows * &.
2.
Release the Tare key. The display will change to A# .
3.
4.
Press the Tare key. The display will change to show the current setting.
5.
Press the Hold or Hold/BMI key to step through the available auto-off times.
6.
When the desired time is displayed, press the Tare key.
The display will change to A# .
7.
Press the Hold or Hold/BMI key. The display will change to 03.
8.
9.
Press the Tare key. The scale will reset.
10. The scale is ready for normal weighing operations.
IMPORTANT! The Auto-Off feature ONLY works when the
scale is powered by the six "AA" batteries.
8
8535-M212-O1 Rev A • MB150
Advertisement
Table of Contents
