Table of Contents
Advertisement
5.
BMI
This annunciator is turned on when entering the height for the BMI feature and
when displaying the calculated body fat.
This annunciator will be turned on and 6! be shown on the display for a few
6.
Hold
seconds to indicate that the weight from the last weighing operation is being
held and the baby, child or adult can be removed from the scale. This feature
is useful if the baby or child is very active.
Æ0Å
7.
This annunciator is on the side of the display. An arrow will be turned on to
indicate the weight is at zero and the scale is ready to use.
8.
Net
The annunciator is on the side of the display. An arrow will be turned on to
show that the weight displayed is net weight. Net weight is determined by
zeroing the weight of an item from the scale such as protective paper, blankets,
pads or toys. This insures that only the baby or adult's weight is displayed.
kg
The kg annunciator is turned on to indicate the weight shown is in kilograms.
lb
The lb annunciator is turned on to indicate the weight shown is in pounds.
The level indicator is located to the side of the
9.
Level
Indicator
display. If the scale is not level (bubble will not be
centered), adjust mounting feet as required to center
bubble and attain a level scale.
The Weight Unit Switch is located on the lower front right of the scale next to the AC power
adapter jack. It allows to operator to easily change the weight units from pound to kilograms or
kilograms to pounds.
DISPLAY ANNUNCIATORS
LEVEL INDICATOR
WEIGHT UNIT SWITCH
AC Power
Adapter Jack
8535-M212-O1 Rev A • MB150
Not Level
Mounting Foot
Weight Unit
Switch
Level
7
Advertisement
Table of Contents
