Operating the Log Loader with the controller
T
he Log Loader has three different functions that can be operated using a controller lever.
The controller levers are illustrated in Figure 3. The LED will illuminate each time you
operate a lever.
• Use the chain drive lever to activate the chain drive. Push the lever forward to
increase the speed. Pull the lever back to decrease the speed and turn off the drive.
• Use the stake lever to operate the stakes. Push the lever forward to lower the
stakes. Pull the lever back to return the stakes to the upright position.
• Use the light lever to turn the lights on and off and adjust the intensity.
Chain drive
lever
Figure 3. Controller levers
Stake lever
Light lever
5