Operating Your Train With Lionchief Remote - Lionel Berkshire LionChief Owner's Manual

The LionChief remote control overview
Operating your train with your LionChief remote
THROTTLE
Control speed and direction with the knob.
Turn the knob to the right to move forward,
left for reverse and back to center (top) for
stop. The LED indicator light will flash to
indicate that speed signals are being sent to
the locomotive.
BELL
Press the BELL button to
begin the bell sounds; press
the button again to turn off
the bell.
ANNOUNCEMENTS
Press the center button for a
variety of announcements.
Note! The announcement button doubles as a 'shift' button. To change the volume, make
sure the engine is stopped, hold shift, and rotate the throttle knob. Clockwise for more
volume, counterclockwise for less volume.
SPEED INDICATOR LIGHT
The red light will remain on during
normal operation. The light will begin to
flash when the locomotive is in motion,
and the flashing will vary with the
locomotive's speed.
WHISTLE
The WHISTLE button will activate
your locomotive's whistle.
7
ON/OFF SWITCH
Turn remote control on and
off. We recommend turning off
the remote when not in use to
conserve battery life. Remove
the batteries for storage.