ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Figure 7-6 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to the F/W
Upload screen.
Figure 7-7 Firmware Upload Error
7.5
Configuration Screen
See the Firmware and Configuration File Maintenance chapter for transferring configuration files using
FTP/TFTP commands.
Click MAINTENANCE and then CONFIGURATION. Information related to backup configuration,
restoring configuration and factory defaults appears as shown next.
7.5.1 Backup Configuration
Backup Configuration allows you to backup (save) the current system (ZyAIR) configuration to your
computer. Backup is highly recommended once your ZyAIR is functioning properly.
Click Backup to save your current ZyAIR configuration to your computer.
Maintenance
7-7