Figure 10-3 Menu 3.5 Wireless Lan Setup; Table 10-2 Menu 3.5 Wireless Lan Setup - ZyXEL Communications ZyAIR B-420 User Manual

Press Space Bar to Toggle.
The following table describes the fields in this menu.
FIELD
Operating Press [SPACE BAR] and select Infrastructure, Ad Hoc or Bridge.
Mode
Enter the ESSID of the AP or the peer ad-hoc computer to which you want to
associate in this field. To associate to an ad-hoc network, you must enter
ESSID the same ESSID as the peer ad-hoc computer.
Enter any to associate to or roam between any infrastructure wireless
networks.
Press [SPACE BAR] to select a channel. This allows you to set the operating
frequency/channel depending on your particular region.
Channel ID
This filed is not available if you select Infrastructure in the Operating Mode
field.
RTS Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
Threshold between 0 and 2432.
Frag. This is the maximum data fragment size that can be sent. Enter a value
Threshold between 256 and 2432.
LAN Setup
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Menu 3.5 - Wireless LAN Setup
Operating Mode= Infrastructure
ESSID= Any
Channel ID= N/A
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Breathing LED= Yes
Output Power= N/A
Edit Bridge Link Configuration= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 10-3 Menu 3.5 Wireless LAN Setup

Table 10-2 Menu 3.5 Wireless LAN Setup

DESCRIPTION EXMAPLE
Infrastruct
ure
Any
N/A
2432
2432
10-3