ZyXEL Communications ZyAIR B-420 User Manual page 149

TYPE CODE
16
0
LOG MESSAGE
Mon dd hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"
Log Commands
Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and
use the commands).
Use the sys logs load command to load the log setting buffer that allows you to configure which logs
the ZyAIR is to record.
Use sys logs category followed by a log category and a parameter to decide what to record
LOG CATEGORIES
error
mten
Use 0 to not record logs for that category,
alerts for that category, and
Use the sys logs save command to store the settings in the ZyAIR (you must do this in order to
record logs).
Log Description
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Chart I-2 ICMP Notes
Information Reply
Information reply message
Chart I-3 Sys log
This message is sent by the "RAS" when this syslog is
generated. The messages and notes are defined in this
appendix's other charts.
Configuring What You Want the ZyAIR to Log
Chart I-4 Log Categories and Available Settings
3 to record both logs and alerts for that category.
DESCRIPTION
DESCRIPTION
AVAILABLE PARAMETERS
0, 1, 2, 3
0, 1
1 to record only logs for that category, 2 to record only
I-3