ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Follow the instructions in the following table to configure the fields in this menu.
FIELD
IP Address
Press [SPACE BAR] and then [ENTER] to select Dynamic to have the
Assignment
ZyAIR obtain an IP address from a DHCP server. You must know the
IP address assigned to the ZyAIR (by the DHCP server) to access the
ZyAIR again.
Select Static to give the ZyAIR a fixed, unique IP address. Enter a
subnet mask appropriate to your network and the gateway IP address if
applicable.
IP Address Enter the (LAN) IP address of your ZyAIR in dotted decimal notation
IP Subnet Mask Your ZyAIR will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing subnetting,
use the subnet mask computed by the ZyAIR.
Gateway IP
Type the IP address of the gateway. The gateway is an immediate
Address
neighbor of your ZyAIR that will forward the packet to the destination.
On the LAN, the gateway must be a router on the same network
segment as your ZyAIR.
When you have completed this menu, press [
your configuration, or press [
10.3 Wireless LAN Setup
Use menu 3.5 to configure your ZyAIR's wireless settings. To edit menu 3.5, enter 3 from the main menu
to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then press [ENTER] to display Menu
3.5 – Wireless LAN Setup as shown next.
10-2
Table 10-1 Menu 3.2 TCP/IP Setup
DESCRIPTION
ENTER
ESC
] at any time to cancel.
] at the prompt "Press ENTER to Confirm..." to save
EXAMPLE
Static
192.168.1.11
255.255.255.0
LAN Setup