Chapter 12 System Information; System Status; Figure 12-1 Menu 24 System Maintenance - ZyXEL Communications ZyAIR B-420 User Manual

This chapter covers the information and diagnostic tools in SMT menus 24.1 to 24.3.
These tools include updates on system status, port status, log and trace capabilities and upgrades for the
system software. This chapter describes how to use these tools in detail.
Type 24 in the main menu and press [ENTER] to open Menu 24
following figure.

12.1 System Status

The first selection, System Status gives you information on the status and statistics of the ports, as shown
next. System Status is a tool that can be used to monitor your ZyAIR. Specifically, it gives you information
on your Ethernet and Wireless LAN status, number of packets sent and received.
To get to System Status, type 24 to go to Menu 24 – System Maintenance. From this menu, type 1.
System Status. There are two commands in Menu 24.1 – System Maintenance – Status. Entering 9 resets
the counters; pressing [ESC] takes you back to the previous screen.
The following table describes the fields present in Menu 24.1 – System Maintenance – Status which are
read-only and meant for diagnostic purposes.
System Information
ZyAIR B-420 Wireless LAN Ethernet Adapter and Bridge
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
Enter Menu Selection Number:

Figure 12-1 Menu 24 System Maintenance

System Information
System Maintenance, as shown in the
–
Chapter 12
12-1