ZyXEL Communications ZyAIR B-220 User Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Adapter
  5. ZyXEL ZyAIR B-220
  6. User manual

ZyXEL Communications ZyAIR B-220 User Manual

Hide thumbs Also See for ZyAIR B-220:
Table of Contents

Advertisement

Quick Links

ZyAIR B-220
802.11b Wireless USB Adapter
User's Guide
Version 5.00
February 2005

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZyAIR B-220 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ZyXEL Communications ZyAIR B-220

Summary of Contents for ZyXEL Communications ZyAIR B-220

  • Page 1 ZyAIR B-220 802.11b Wireless USB Adapter User’s Guide Version 5.00 February 2005...

  • Page 3: Copyright

    ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved.

  • Page 4: Federal Communications Commission (Fcc) Interference Statement

    ZyAIR B-220 User’s Guide Federal Communications Commission (FCC) Interference Statement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operations.
  • Page 5 ZyAIR B-220 User’s Guide Certifications Go to www.zyxel.com 1 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 2 Select the certification you wish to view from this page Federal Communications Commission (FCC) Interference Statement...

  • Page 6: Zyxel Limited Warranty

    ZyAIR B-220 User’s Guide ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase.

  • Page 7: Customer Support

    ZyAIR B-220 User’s Guide Customer Support Please have the following information ready when you contact customer support. • Product model and serial number. • Warranty Information. • Date that you received your device. • Brief description of the problem and the steps you took to solve it.
  • Page 8 ZyAIR B-220 User’s Guide Customer Support...

  • Page 9: Table Of Contents

    ZyAIR B-220 User’s Guide Table of Contents Copyright ........................2 Federal Communications Commission (FCC) Interference Statement ....3 ZyXEL Limited Warranty..................5 Customer Support....................6 Table of Contents ..................... 8 List of Figures ......................12 List of Tables ......................14 Preface ........................
  • Page 10 ZyAIR B-220 User’s Guide 2.2.3 WPA ......................26 2.2.3.1 User Authentication .................26 2.2.3.2 Encryption ..................26 2.2.4 WPA-PSK Application Example ..............27 2.2.5 WPA with RADIUS Application Example ..........28 2.3 Authentication Type ....................29 2.4 Preamble Type ....................29 Chapter 3 Wireless Station Mode Configuration ..............30 3.1 Introduction ......................30...
  • Page 11 ZyAIR B-220 User’s Guide 6.4 Problems Communicating With Other Computers ..........59 Appendix A Product Specifications ..................60 Appendix B Access Point Mode Setup Example ..............62 Appendix C Disable Windows XP Wireless LAN Configuration Tool........66 Appendix D Management with Wireless Zero Configuration ..........72 Appendix E Types of EAP Authentication ................
  • Page 12 ZyAIR B-220 User’s Guide Table of Contents...

  • Page 13: List Of Figures

    ZyAIR B-220 User’s Guide List of Figures Figure 1 ZyXEL Utility: System Tray Icon .............. 19 Figure 2 ZyXEL Utility: Change Modes ..............20 Figure 3 IBSS Example ..................23 Figure 4 BSS Example ..................23 Figure 5 Infrastructure Network Example .............. 24 Figure 6 ZyAIR as an Access Point Example ............
  • Page 14 ZyAIR B-220 User’s Guide Figure 39 Windows XP SP1: Wireless Network Connection ......... 67 Figure 40 Windows XP SP2: Wireless Network Connection ......... 67 Figure 41 Windows XP SP1: Wireless Network Connection Properties ....68 Figure 42 Windows XP SP2: Wireless Network Connection Properties ....68 Figure 43 Windows XP SP1: Wireless Network Connection Status ......

  • Page 15: List Of Tables

    ZyAIR B-220 User’s Guide List of Tables Table 1 ZyXEL Utility: System Tray Icon ............... 19 Table 2 Station Mode: Link Info ................31 Table 3 Station Mode: Link Info: Trend Chart ............32 Table 4 Station Mode: Site Survey ................ 33 Table 5 Station Mode: Security Settings: WEP .............
  • Page 16 ZyAIR B-220 User’s Guide List of Tables...

  • Page 17: Preface

    ZyAIR B-220 User’s Guide Preface Congratulations on your purchase of the ZyAIR B-220 802.11b Wireless USB Adapter. Note: Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com for global products, or at www.us.zyxel.com for North American products.

  • Page 18: Graphics Icons Key

    • For brevity’s sake, we will use “e.g.,” as a shorthand for “for instance”, and “i.e.,” for “that is” or “in other words” throughout this manual. • The ZyAIR B-220 802.11b Wireless USB Adapter may be referred to as the ZyAIR in this user’s guide.

  • Page 19: Chapter 1 Getting Started

    ZyAIR B-220 User’s Guide H A P T E R Getting Started This chapter introduces the ZyAIR and prepares you to use the ZyXEL Utility. 1.1 About Your ZyAIR The ZyAIR is an IEEE 802.11b compliant wireless LAN adapter. With the ZyAIR, you can enjoy the wireless mobility within the coverage area.

  • Page 20: Windows Xp Users Only

    ZyAIR B-220 User’s Guide Refer to the Odyssey Client Manager documentation for more information. 1.4 Windows XP Users Only You must disable WZC if you want to use the ZyXEL utility. Refer to the appendices on how to deactivate WZC or how to use WZC to manage the ZyAIR.

  • Page 21: Change Zyair Mode

    ZyAIR B-220 User’s Guide In wireless station mode, your ZyAIR must connect to a peer wireless station or an AP to take part in your wireless network. In access point mode, your ZyAIR functions as an access point. This allows you to set up your wireless network without using a dedicated AP device.
  • Page 22 ZyAIR B-220 User’s Guide Chapter 1 Getting Started...

  • Page 23: Wireless Lan Network

    ZyAIR B-220 User’s Guide H A P T E R Wireless LAN Network This chapter provides background information on wireless LAN network. 2.1 Overview This section describes the wireless LAN network terms and applications. 2.1.1 SSID The SSID (Service Set Identity) is a unique name shared among all wireless devices in a wireless network.

  • Page 24: Ad-Hoc (Ibss)

    ZyAIR B-220 User’s Guide To connect to a wired network within a coverage area using Access Points (APs), set the ZyAIR operation mode to Infrastructure (BSS). An AP acts as a bridge between the wireless stations and the wired network. In case you do not wish to connect to a wired network, but prefer to set up a small independent wireless workgroup without an AP, use the Ad-hoc (IBSS) (Independent Basic Service Set) mode.

  • Page 25: Access Point Mode

    ZyAIR B-220 User’s Guide Figure 5 Infrastructure Network Example 2.1.4.3 Access Point Mode The following figure depicts a network example in which you set the ZyAIR in access point mode. Figure 6 ZyAIR as an Access Point Example In the example, the ZyAIR is installed on computer A and set to operate in access point mode.

  • Page 26: Wireless Lan Security

    ZyAIR B-220 User’s Guide Figure 7 Roaming Example 2.2 Wireless LAN Security Wireless LAN security is vital to your network to protect wireless communications. Configure the wireless LAN security using the Configuration or the Profile Security Settings screen. If you do not enable any wireless security on your ZyAIR, the ZyAIR’s wireless communications are accessible to any wireless networking device that is in the coverage area.

  • Page 27: Ieee 802.1X

    ZyAIR B-220 User’s Guide 2.2.2 IEEE 802.1x The IEEE 802.1x standard outlines enhanced security methods for both the authentication of wireless stations and encryption key management. Authentication can be done using an external RADIUS server. 2.2.2.1 EAP Authentication EAP (Extensible Authentication Protocol) is an authentication protocol that runs on top of the IEEE 802.1x transport mechanism in order to support multiple types of user authentication.

  • Page 28: Wpa-Psk Application Example

    ZyAIR B-220 User’s Guide TKIP regularly changes and rotates the encryption keys so that the same encryption key is never used twice. The RADIUS server distributes a Pairwise Master Key (PMK) key to the AP that then sets up a key hierarchy and management system, using the pair-wise key to dynamically generate unique data encryption keys to encrypt every data packet that is wirelessly communicated between the AP and the wireless clients.

  • Page 29: Wpa With Radius Application Example

    ZyAIR B-220 User’s Guide Figure 8 WPA-PSK Authentication 2.2.5 WPA with RADIUS Application Example You need the IP address of the RADIUS server, its port number (default is 1812), and the RADIUS shared secret. A WPA application example with an external RADIUS server looks as follows.

  • Page 30: Authentication Type

    ZyAIR B-220 User’s Guide 2.3 Authentication Type The IEEE 802.11b standard describes a simple authentication method between the wireless stations and AP. Three authentication modes are defined: Auto, Open System and Shared Key. • Open System mode is implemented for ease-of-use and when security is not an issue.

  • Page 31: Wireless Station Mode Configuration

    ZyAIR B-220 User’s Guide H A P T E R Wireless Station Mode Configuration This chapter shows you how to configure your ZyAIR in wireless station mode. 3.1 Introduction To set your ZyAIR in wireless station mode, refer to Section 1.6 “ZyAIR Modes” on page 3.2 The Link Info Screen...

  • Page 32: Trend Chart

    ZyAIR B-220 User’s Guide The following table describes the labels in this screen. Table 2 Station Mode: Link Info LABEL DESCRIPTION AP Mode Use the radio button to set the ZyAIR to operate in wireless station or access point mode. Refer to Section 1.6 “ZyAIR Modes”...

  • Page 33: The Site Survey Screen

    ZyAIR B-220 User’s Guide Figure 11 Station Mode: Link Info: Trend Chart The following table describes the labels in this screen. Table 3 Station Mode: Link Info: Trend Chart LABEL DESCRIPTION Transmit This field displays the current data transmission rate in kilobits per second (Kbps).

  • Page 34: Connecting To A Wlan Network

    ZyAIR B-220 User’s Guide The following table describes the labels in this screen. Table 4 Station Mode: Site Survey LABEL DESCRIPTION Available Network Click a column heading to sort the entries. List denotes that the wireless device is in infrastructure mode and the wireless security is activated.

  • Page 35: Security Settings

    ZyAIR B-220 User’s Guide 3.3.2 Security Settings When you configure the ZyAIR to connect to a network with wireless security activated and the security settings are disabled on the ZyAIR, the screen varies according to the encryption method used by the selected network.

  • Page 36: Wpa-Psk

    ZyAIR B-220 User’s Guide Table 5 Station Mode: Security Settings: WEP (continued) LABEL DESCRIPTION Key x (where x is a Select this option if you want to manually enter the WEP keys. Enter the WEP key number between 1 in the field provided.

  • Page 37: Wpa-Radius

    ZyAIR B-220 User’s Guide The following table describes the labels in this screen. Table 6 Station Mode: Security Settings: WPA-PSK LABEL DESCRIPTION Encryption Type The encryption mechanisms used for WPA and WPA-PSK are the same. The only difference between the two is that WPA-PSK uses a simple common password, instead of user-specific credentials.

  • Page 38: Figure 16 Station Mode: Security Settings: Wpa-Radius: Authentication

    ZyAIR B-220 User’s Guide 3.3.2.3.2 Authentication Figure 16 Station Mode: Security Settings: WPA-RADIUS: Authentication The following table describes the labels in this screen. Table 8 Station Mode: Security Settings: WPA-RADIUS: Authentication LABEL DESCRIPTION Authentication Select an authentication method from the drop down list. Options are EAP-TLS, Type EAP-TTLS, EAP-MD5, EAP-PEAP and LEAP.

  • Page 39: Radius

    ZyAIR B-220 User’s Guide Table 8 Station Mode: Security Settings: WPA-RADIUS: Authentication LABEL DESCRIPTION PEAP Inner EAP This field is only available when you select EAP-PEAP in the Authentication Type field. Use the drop-down list box to select a PEAP protocol. Options are MD5 CHALLENGE, TOKEN CARD and MS CHAP v2.

  • Page 40: Figure 18 Station Mode: Security Settings: Radius: Authentication

    ZyAIR B-220 User’s Guide Table 9 Station Mode: Security Settings: RADIUS: WEP Encryption (continued) LABEL DESCRIPTION Key x (where x is a Enter the WEP key in the field provided. number between 1 If you select 64 Bits in the WEP field.

  • Page 41: The Profile Screen

    ZyAIR B-220 User’s Guide Table 10 Station Mode: Security Settings: RADIUS: Authentication LABEL DESCRIPTION Certificate This field is only available when you select EAP-TLS in the Authentication Type field. Specify the location and name of a certificate in the Certificate field or click Browse to locate it.

  • Page 42: Figure 19 Station Mode: Profile

    ZyAIR B-220 User’s Guide Figure 19 Station Mode: Profile The following table describes the labels in this screen. Table 11 Station Mode: Profile LABEL DESCRIPTION Profile List Click a column heading to sort the entries. denotes that the wireless device is in infrastructure mode and the wireless security is activated.

  • Page 43: Adding A New Profile

    ZyAIR B-220 User’s Guide Table 11 Station Mode: Profile (continued) LABEL DESCRIPTION Security This field shows whether data encryption is activated (WEP, WPA-PSK, WPA- RADIUS, RADIUS) or inactive (Disabled). Transmission Rate This field displays the transmission speed of the selected profile in megabits per second (Mbps).

  • Page 44: Figure 21 Station Mode: Profile: Select A Channel

    ZyAIR B-220 User’s Guide Table 12 Station Mode: Profile: Add New Profile (continued) LABEL DESCRIPTION Scan Info This table displays the information of the available wireless networks within the transmission range. denotes that the wireless device is in infrastructure mode and the wireless security is activated.

  • Page 45: Figure 22 Station Mode: Profile: Wireless Settings

    ZyAIR B-220 User’s Guide The following table describes the labels in this screen. Table 13 Station Mode: Profile: Select a Channel LABEL DESCRIPTION Wireless Settings Channel Select a channel number from the drop-down list box. To associate to an ad-hoc network, you must use the same channel as the peer computer.

  • Page 46: Figure 23 Station Mode: Profile: Security Settings

    ZyAIR B-220 User’s Guide Figure 23 Station Mode: Profile: Security Settings 5 This read-only screen shows a summary of the new profile settings. Verify that the settings are correct. Click Save to save and go to the next screen. Click Back to return to the previous screen.

  • Page 47: The Adapter Screen

    ZyAIR B-220 User’s Guide Figure 25 Station Mode: Profile: Activate the Profile 3.5 The Adapter Screen To set the advanced features on the ZyAIR, click the Adapter tab. Figure 26 Station Mode: Adapter The following table describes the labels in this screen.
  • Page 48 ZyAIR B-220 User’s Guide Chapter 3 Wireless Station Mode Configuration...

  • Page 49: Access Point Mode Configuration

    ZyAIR B-220 User’s Guide H A P T E R Access Point Mode Configuration This chapter shows you how to configure your ZyAIR in access point mode. 4.1 Introduction To set your ZyAIR as an Access Point (AP), refer to Section 1.6 “ZyAIR Modes”...

  • Page 50: The Configuration Screen

    ZyAIR B-220 User’s Guide Figure 27 Access Point Mode: Link Info The following table describes the labels in this screen. Table 15 Access Point Mode: Link Info LABEL DESCRIPTION Status SSID This field displays the name that identifies your ZyAIR in the wireless LAN network.

  • Page 51: Figure 28 Access Point Mode: Configuration

    ZyAIR B-220 User’s Guide Figure 28 Access Point Mode: Configuration The following table describes the labels in this screen. Table 16 Access Point Mode: Configuration LABEL DESCRIPTION Wireless Settings SSID The SSID identifies the Service Set to which a wireless station is associated.

  • Page 52: The Mac Filter Screen

    ZyAIR B-220 User’s Guide Table 16 Access Point Mode: Configuration (continued) LABEL DESCRIPTION Pass Phrase When you select the radio button, enter the passphrase. As you enter the passphrase, the ZyAIR automatically generates four different WEP key and displays it in the key field below. Refer to Section 2.2.1 “Data Encryption with...

  • Page 53: Figure 29 Access Point Mode: Mac Filter

    ZyAIR B-220 User’s Guide Figure 29 Access Point Mode: MAC Filter The following table describes the labels in this screen. Table 17 Access Point Mode: MAC Filter LABEL DESCRIPTION Filter Type Define the filter action for the list of MAC addresses in the MAC address filter table.
  • Page 54 ZyAIR B-220 User’s Guide Chapter 4 Access Point Mode Configuration...

  • Page 55: Chapter 5 Maintenance

    5.2 Uninstalling the ZyXEL Utility Follow the steps below to remove (or uninstall) the ZyXEL Utility from your computer. 1 Click Start, Programs, ZyAIR B-220 Utility, Uninstall ZyAIR B-220 Utility. 2 When prompted, click OK to remove the driver and the utility software.

  • Page 56: Upgrading The Zyxel Utility

    ZyAIR B-220 User’s Guide Figure 31 Confirm Uninstall 3 Click Finish to complete uninstalling the software and restart the computer when prompted. Figure 32 Uninstalling the ZyXEL Utility 5.3 Upgrading the ZyXEL Utility Note: Before you uninstall the ZyXEL Utility, take note of the current network configuration.
  • Page 57 ZyAIR B-220 User’s Guide 3 Follow the steps in Section 5.2 “Uninstalling the ZyXEL Utility” on page 54 to remove the current ZyXEL Utility from your computer. 4 Restart your computer when prompted. 5 Remove the ZyAIR from your computer.
  • Page 58 ZyAIR B-220 User’s Guide Chapter 5 Maintenance...

  • Page 59: Chapter 6 Troubleshooting

    ZyAIR B-220 User’s Guide H A P T E R Troubleshooting This chapter covers potential problems and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 6.1 Problems Starting the ZyXEL Utility Program...

  • Page 60: Problem With The Link Status

    ZyAIR B-220 User’s Guide 6.3 Problem with the Link Status Table 21 Troubleshooting Link Quality PROBLEM CORRECTIVE ACTION The link quality Search and connect to another AP with a better link quality using the Site Survey and/or signal screen. strength is poor all Move your computer closer to the AP or the peer computer(s) within the the time.

  • Page 61: Product Specifications

    ZyAIR B-220 User’s Guide Appendix A Product Specifications Table 23 Product Specifications PHYSICAL AND ENVIRONMENTAL Product Name ZyAIR B-220 802.11b Wireless USB Adapter Interface USB compatible Standards IEEE 802.11b Network Architectures Infrastructure Ad-Hoc Operating Frequencies 2.412-2.484GHz Operating Channels 11 Channels (North America)
  • Page 62 ZyAIR B-220 User’s Guide Appendix A Product Specifications...

  • Page 63: Access Point Mode Setup Example

    ZyAIR B-220 User’s Guide Appendix B Access Point Mode Setup Example This example uses the network sharing feature in Windows 2000 to bridge the wired and wireless network when you set the ZyAIR in access point (AP) mode. Refer to Chapter 4, “Access Point Mode Configuration,”...

  • Page 64: Figure 34 Windows 2000: Network And Dial-Up Connections

    ZyAIR B-220 User’s Guide Figure 34 Windows 2000: Network and Dial-up Connections 4 A Properties screen displays. Click the Sharing tab and select Enable Internet Connection Sharing for this connection. Click OK. Figure 35 Windows 2000: Network Properties If there is more than one network adapter on the computer, select Enable Internet Connection Sharing for this connection and select the network adapter to which you want to share network access.

  • Page 65: Figure 36 Windows 2000: Network Properties: Select Network Adapter

    ZyAIR B-220 User’s Guide Figure 36 WIndows 2000: Network Properties: Select Network Adapter 5 A notice screen displays. Click Yes. Figure 37 Windows 2000: Local Network Configuring the Wireless Station Computer Refer to Appendix F, “Setting up Your Computer’s IP Address,” on page 88 for more information on how to set up the wireless station computer(s) IP address.
  • Page 66 ZyAIR B-220 User’s Guide Appendix B Access Point Mode Setup Example...

  • Page 67: Disable Windows Xp Wireless Lan Configuration Tool

    ZyAIR B-220 User’s Guide Appendix C Disable Windows XP Wireless LAN Configuration Tool Windows XP includes a configuration tool (also known as Wireless Zero Configuration (WZC)) for wireless devices. Follow the steps below to disable the configuration tool in Windows XP after you install the ZyXEL Utility.

  • Page 68: Figure 39 Windows Xp Sp1: Wireless Network Connection

    ZyAIR B-220 User’s Guide Figure 39 Windows XP SP1: Wireless Network Connection Windows XP SP2: When a Wireless Network Connection window displays, click Change advanced settings under Related Tasks and then the Wireless Networks tab. Figure 40 Windows XP SP2: Wireless Network Connection 3 In the Wireless Network Connection Properties window, make sure the Use Windows to configure my wireless network settings check box is not selected.

  • Page 69: Figure 41 Windows Xp Sp1: Wireless Network Connection Properties

    ZyAIR B-220 User’s Guide Figure 41 Windows XP SP1: Wireless Network Connection Properties Figure 42 Windows XP SP2: Wireless Network Connection Properties Via the Control Panel 1 If the icon for the wireless network connection is not in the system tray, click Start,...

  • Page 70: Figure 43 Windows Xp Sp1: Wireless Network Connection Status

    ZyAIR B-220 User’s Guide Control Panel and double-click Network Connections. 2 Double-click on the icon for wireless network connection to display a status window as shown next. Figure 43 Windows XP SP1: Wireless Network Connection Status Figure 44 Windows XP SP2: Wireless Network Connection Status 3 Click Properties and click the Wireless Networks tab.

  • Page 71: Figure 45 Windows Xp Sp1: Wireless Network Connection Properties

    ZyAIR B-220 User’s Guide Figure 45 Windows XP SP1: Wireless Network Connection Properties Figure 46 Windows XP SP2: Wireless Network Connection Properties Appendix C Disable Windows XP Wireless LAN Configuration Tool...
  • Page 72 ZyAIR B-220 User’s Guide Appendix C Disable Windows XP Wireless LAN Configuration Tool...

  • Page 73: Management With Wireless Zero Configuration

    ZyAIR B-220 User’s Guide Appendix D Management with Wireless Zero Configuration This appendix shows you how to manage your ZyAIR using the Windows XP wireless configuration tool. Be sure you have the Windows XP service pack 2 installed on your computer. Otherwise, you should at least have the Windows XP service pack 1 already on your computer and download the support patch for WPA from the Microsoft web site.

  • Page 74: Figure 47 Windows Xp Sp2: Wzc Not Available

    ZyAIR B-220 User’s Guide Figure 47 Windows XP SP2: WZC Not Available Connecting to a Wireless Network 1 Double-click the network icon for wireless connections in the system tray to open the Wireless Network Connection Status screen. Figure 48 Windows XP SP2: System Tray Icon The type of the wireless network icon in Windows XP SP2 indicates the status of the ZyAIR.

  • Page 75: Figure 49 Windows Xp Sp2: Wireless Network Connection Status

    ZyAIR B-220 User’s Guide Table 24 Windows XP SP2: System Tray Icon (continued) ICON DESCRIPTION The connection to a wireless network is limited because the network did not assign a network address to the computer. The ZyAIR is not connected to a wireless network.

  • Page 76: Figure 50 Windows Xp Sp1: Wireless Network Connection Status

    ZyAIR B-220 User’s Guide Figure 50 Windows XP SP1: Wireless Network Connection Status 3 Windows XP SP2: Click Refresh network list to reload and search for available wireless devices within transmission range. Select a wireless network in the list and click Connect to join the selected wireless network.

  • Page 77: Figure 51 Windows Xp Sp2: Wireless Network Connection

    ZyAIR B-220 User’s Guide Figure 51 Windows XP SP2: Wireless Network Connection The following table describes the icons in the wireless network list. Table 25 Windows XP SP2: Wireless Network Connection ICON DESCRIPTION This denotes that the wireless security is activated for the wireless network.

  • Page 78: Figure 52 Windows Xp Sp1: Wireless Network Connection Properties

    ZyAIR B-220 User’s Guide Figure 52 Windows XP SP1: Wireless Network Connection Properties 4 Windows XP SP2: If the wireless security is activated for the selected wireless network, the Wireless Network Connection screen displays. You must set the related fields in the Wireless Network Connection screen to the same security settings as the associated AP.

  • Page 79: Figure 53 Windows Xp Sp2: Wireless Network Connection: Wep Or Wpa-Psk

    ZyAIR B-220 User’s Guide Figure 53 Windows XP SP2: Wireless Network Connection: WEP or WPA-PSK Figure 54 Windows XP SP2: Wireless Network Connection: No Security 5 Verify that you have successfully connected to the selected network and check connection status in the wireless network list or the connection icon in the Preferred networks or Available networks list.

  • Page 80: Figure 55 Windows Xp: Wireless (Network) Properties: Association

    ZyAIR B-220 User’s Guide Figure 55 Windows XP: Wireless (network) properties: Association The following table describes the labels in this screen. Table 27 Windows XP: Wireless (network) properties: Association LABEL DESCRIPTION Network name (SSID) This field displays the SSID (Service Set IDentifier) of each wireless network.

  • Page 81: Figure 56 Windows Xp: Wireless (Network) Properties: Authentication

    ZyAIR B-220 User’s Guide Table 27 Windows XP: Wireless (network) properties: Association (continued) LABEL DESCRIPTION Click OK to save your changes. Cancel Click Cancel to leave this screen without saving any changes you may have made. Authentication Click the Authentication tab in the Wireless (network) properties screen to display the screen shown next.

  • Page 82: Figure 57 Windows Xp: Protected Eap Properties

    ZyAIR B-220 User’s Guide Table 28 Windows XP: Wireless (network) properties: Authentication (continued) LABEL DESCRIPTION Authenticate as Select this check box to have the computer send its information to the network for computer when authentication when a user is not logged on.

  • Page 83: Table 29 Windows Xp: Protected Eap Properties

    ZyAIR B-220 User’s Guide Table 29 Windows XP: Protected EAP Properties LABEL DESCRIPTION Validate server Select the check box to verify the certificate of the authentication server. certificate Connect to these Select the check box and specify a domain in the field below to have your servers computer connect to a server which resides only within this domain.

  • Page 84: Figure 58 Windows Xp: Smart Card Or Other Certificate Properties

    ZyAIR B-220 User’s Guide Smart Card or other Certificate Properties Figure 58 Windows XP: Smart Card or other Certificate Properties The following table describes the labels in this screen. Table 30 Windows XP: Smart Card or other Certificate Properties LABEL DESCRIPTION Use my smart card Select this check box to use the smart card for authentication.

  • Page 85: Figure 59 Windows Xp Sp2: Wireless Networks: Preferred Networks

    ZyAIR B-220 User’s Guide Ordering the Preferred Networks Follow the steps below to manage your preferred networks. 1 Windows XP SP2: Click Change the order of preferred networks in the Wireless Network Connection screen (see Figure 50 on page 75). The screen displays as shown.

  • Page 86: Figure 60 Windows Xp Sp1: Wireless Networks: Preferred Networks

    ZyAIR B-220 User’s Guide Figure 60 Windows XP SP1: Wireless Networks: Preferred Networks 2 Whenever the ZyAIR tries to connect to a new network, the new network is added in the Preferred networks table automatically. Select a network and click Move up or Move down to change it’s order, click Remove to delete it or click Properties to view the...

  • Page 87: Types Of Eap Authentication

    ZyAIR B-220 User’s Guide Appendix E Types of EAP Authentication This appendix discusses the five popular EAP authentication types: EAP-MD5, EAP-TLS, EAP-TTLS, PEAP and LEAP. The type of authentication you use depends on the RADIUS server. Consult your network administrator for more information.

  • Page 88: Table 31 Comparison Of Eap Authentication Types

    ZyAIR B-220 User’s Guide PEAP (Protected EAP) Like EAP-TTLS, server-side certificate authentication is used to establish a secure connection, then use simple username and password methods through the secured connection to authenticate the clients, thus hiding client identity. However, PEAP only supports EAP methods, such as EAP-MD5, EAP-MSCHAPv2 and EAP-GTC (EAP-Generic Token Card), for client authentication.

  • Page 89: Setting Up Your Computer's Ip Address

    ZyAIR B-220 User’s Guide Appendix F Setting up Your Computer’s IP Address All computers must have a 10M or 100M Ethernet adapter card and TCP/IP installed. Windows 95/98/Me/NT/2000/XP, Macintosh OS 7 and later operating systems and all versions of UNIX/LINUX include the software components you need to install and use TCP/ IP on your computer.

  • Page 90: Figure 61 Windows 95/98/Me: Network: Configuration

    ZyAIR B-220 User’s Guide Figure 61 WIndows 95/98/Me: Network: Configuration Installing Components The Network window Configuration tab displays a list of installed components. You need a network adapter, the TCP/IP protocol and Client for Microsoft Networks. If you need the adapter: 1 In the Network window, click Add.

  • Page 91: Figure 62 Windows 95/98/Me: Tcp/Ip Properties: Ip Address

    ZyAIR B-220 User’s Guide 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click 5 Restart your computer so the changes you made take effect. Configuring 1 In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties 2 Click the IP Address tab.

  • Page 92: Figure 63 Windows 95/98/Me: Tcp/Ip Properties: Dns Configuration

    ZyAIR B-220 User’s Guide Figure 63 Windows 95/98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • If you do not know your gateway’s IP address, remove previously installed gateways. • If you have a gateway IP address, type it in the New gateway field and click Add.

  • Page 93: Figure 64 Windows Xp: Start Menu

    ZyAIR B-220 User’s Guide Figure 64 Windows XP: Start Menu 2 For Windows XP, click Network Connections. For Windows 2000/NT, click Network and Dial-up Connections. Figure 65 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties.

  • Page 94: Figure 66 Windows Xp: Control Panel: Network Connections: Properties

    ZyAIR B-220 User’s Guide Figure 66 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties. Figure 67 Windows XP: Local Area Connection Properties 5 The Internet Protocol TCP/IP Properties window opens (the General tab in Windows XP).

  • Page 95: Figure 68 Windows Xp: Advanced Tcp/Ip Settings

    ZyAIR B-220 User’s Guide • If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. Click Advanced. Figure 68 Windows XP: Advanced TCP/IP Settings 6 If you do not know your gateway's IP address, remove any previously installed gateways in the IP Settings tab and click OK.

  • Page 96: Figure 69 Windows Xp: Internet Protocol (Tcp/Ip) Properties

    ZyAIR B-220 User’s Guide • Click Obtain DNS server address automatically if you do not know your DNS server IP address(es). • If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields.

  • Page 97: Figure 70 Macintosh Os 8/9: Apple Menu

    ZyAIR B-220 User’s Guide Figure 70 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list. Figure 71 Macintosh OS 8/9: TCP/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configure: list. Appendix F Setting up Your Computer’s IP Address...

  • Page 98: Figure 72 Macintosh Os X: Apple Menu

    ZyAIR B-220 User’s Guide 4 For statically assigned settings, do the following: • From the Configure box, select Manually. • Type your IP address in the IP Address box. • Type your subnet mask in the Subnet mask box. •...

  • Page 99: Figure 73 Macintosh Os X: Network

    ZyAIR B-220 User’s Guide Figure 73 Macintosh OS X: Network 4 For statically assigned settings, do the following: • From the Configure box, select Manually. • Type your IP address in the IP Address box. • Type your subnet mask in the Subnet mask box.
  • Page 100 ZyAIR B-220 User’s Guide Appendix F Setting up Your Computer’s IP Address...

  • Page 101: Index

    ZyAIR B-220 User’s Guide Index creating a new profile current configuration current connection status About current status about your ZyAIR Customer Support access point (AP) 18, 23 access point mode 24, 31, 48 additional setup requirements configuration activating a profile...
  • Page 102 ZyAIR B-220 User’s Guide profile 31, 41 activation add new 41, 42 IBSS (Independent Basic Service Set) delete IEEE 802.1x 80, 87 edit information infrastructure roaming installation utility Quick Start Guide 16, 18 LEAP (Lightweight Extensible Authentication Protocol) link information...
  • Page 103 ZyAIR B-220 User’s Guide wireless standard 31, 60 wireless station mode 20, 31 configuration TLS (Transport Layer Security) transmission rate 31, 42, 46, 49, 60 preferred network transmission rate (Tx Rate) security settings transmit key 34, 38 WZC (Wireless Zero Configuration)

Table of Contents