How To Start The Setup Utility; Main Setup - Supero SuperServer 5016I-T User Manual

S S
UPER ERVER 5016I-T/5016I-TF User's Manual

How to Start the Setup Utility

Normally, the only visible Power-On Self-Test (POST) routine is the memory test.
As the memory is being tested, press the <Delete> key to enter the main menu of
the AMI BIOS Setup Utility. From the main menu, you can access the other setup
screens. An AMI BIOS identifi cation string is displayed at the left bottom corner of
the screen, below the copyright message.
Warning! Do not upgrade the BIOS unless your system has a BIOS-related
issue. Flashing the wrong BIOS can cause irreparable damage to the sys-
tem. In no event shall Supermicro be liable for direct, indirect, special, inci-
dental, or consequential damages arising from a BIOS update. If you have
to update the BIOS, do not shut down or reset the system while the BIOS
is updating to avoid possible boot failure. Refer to our web site for BIOS
recovery procedures < http://www.supermicro.com/support/manuals/ >.
7-2

Main Setup

7-2