Table of Contents
Advertisement
S
S
UPER
ERVER 5016I-T/5016I-TF User's Manual
Dedicated IPMI LAN
Port*
Keyboard/
Mouse Ports
USB Ports
*Note: the dedicated IPMI LAN port is included on the 5016I-TF only.
6-2
Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the serverboard to provide you with system control buttons and
status indicators. These wires have been bundled together in a ribbon cable to
simplify the connection. Connect the cable from JF1 on the serverboard to the the
Control Panel PCB (printed circuit board). Make sure the red wire plugs into pin 1
on both headers. Pull all excess cabling out of the airfl ow path. The LEDs inform
you of system status. See Chapter 3 for details on the LEDs and the control panel
buttons. Details on JF1 can be found in Chapter 5.
Figure 6-1. Chassis Front View
Figure 6-2. Chassis Rear View
COM1 Port
VGA Port
6-2
Ethernet Ports
Advertisement
Table of Contents
