Overheat/Fan Fail; Nic2; Nic1; Hdd - Supero SuperServer 5016I-T User Manual

S S
UPER ERVER 5016I-T/5016I-TF User's Manual

Overheat/Fan Fail

When this LED fl ashes, it indicates a fan failure. When on continuously it indicates
an overheat condition, which may be caused by cables obstructing the airfl ow in
the system or the ambient room temperature being too warm. Check the routing of
the cables and make sure all fans are present and operating normally. You should
also check to make sure that the chassis covers are installed. Finally, verify that
the heatsinks are installed properly (see Chapter 5). This LED will remain fl ashing
or on as long as the indicated condition exists.
2

NIC2

Indicates network activity on LAN2 when fl ashing .
1

NIC1

Indicates network activity on LAN1 when fl ashing.

HDD

Channel activity for all HDDs. This light indicates DVD-ROM and/or SATA drive
activity when fl ashing.
3-2