RANGE HOOD USE
RANGE HOOD USE
The range hood is designed to remove smoke and cook-
ing vapors from the cooktop area. For best results, start
the hood before cooking and allow it to operate several
minutes after the cooking is complete to clear all smoke
from the kitchen.
A Charcoal Filter Kit to remove odors is available. See
page 15 for more information regarding this kit.
The hood controls are located on the front of the range hood.
A. Halogen lights
C. Filter retainer
B. Grease filter
Range Hood Controls
Operating the light
The Light On/Off button controls both lights. Press once
for On and again for Off.
Operating the blower
The Fan On/Off button turn the blower on.
The speed can be changed anytime during fan operation
by pressing the desired blower speed button.
Press the Fan On/Off button turn the blower off.
To Reduce The Risk Of Fire Or Electrical shock
disconnect from power supply before cleaning.
Clean the hood and grease filters frequently
according to the following instructions. Replace
grease filter before operating hood.
Do not use soap-filled scouring pads, abrasive cleaners,
Cooktop Polishing Creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use
cleaners that contain chlorine.
Use warm water with liquid detergent or all purpose
cleaner and soft cloth to clean outside surfaces.
Rinse with clean water and dry with soft, lint-free cloth.
Use glass cleaner to remove fingerprints.
For stainless steel finish rub in direction of grain to
avoid scratching or damaging the surface.
NOTE: On stainless steel finish, clean in direction of
stainless steel brush to avoid scratching or damaging
To clean or replace grease filter:
Remove phillips screw from
the filter retainer.
B. Grease filter retainer
C. Grease filter
To remove, pull the filter retainer toward the front of
the range hood and pull down on the front edge of the filter.