OPM-4250 | OPM-4250R
5.5.
"new design/Last design" setting
y
WhenComPortissuccessfullyconnected,pop-upwindowfor"Newdesign/Lastdesign"
appears.
New/LastDesignSet
y
Click"OpenNewDesign"topreparenewconfiguration.
y
C lick"OpenLastDesign"togotolastdesignbeforeclosing.
y
WhentheconnectionissuccessfullycompletedaftersettingComPort,following
Messagedialogisdisplayed.Thedialogwindowwillbedisappearedin1second.
- 30 -
Infinitely Expandable
5.6.
Multi-screen configuration
1
Input the numbers of X and Y
-
X is for the number of row and Y is for column.
-
X and Y can be selected within the range from 1 to 15. The maximum MDPD quantity of MSCS
control is 100 sets.
-
MPDP image of selected numbers of X and Y is displayed in the Screen configuration in one
second after setting the number.
ScreenConfigurationSetting
2
Select one of input sources from DVI 1 or DVI 2.
3
Execution of the configuration.
-
When you click "PLAY"button after selecting input source from Source select and the numbers of
X and Y in MPDP Configuration, the configuration of MPDP is generated as shown in the figure
below.
DVI 1
DVI 1
DVI 1
DVI 1
DVI 1
DVI 1
※
inFO
:
-
Check the resolution of the input source. It is displayed at the upper right corner of the screen.
-
Check the signal. If there is no input signal, "No signal" is displayed.
- 31 -
DVI 1
DVI 1
DVI 1