Guidance For Users - Orion OPM-4250 User Manual

OPM-4250 | OPM-4250R
3.

guidance for Users

input/Output Terminals
RS-232C DVI-D_2
OUTPUT INPUT
CAUTION OUTPUT
To prevent electric shock,
Do not remove cover.
No user serviceable part inside Refer servicing to qualified service personal.
FCC Verified : Class "A"
INPUT
ID SELECT
DVI-D_1
• Model Name : OPM-4250
• Voltage : AC~100 - 240V OUTPUT
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
PDP
CO., LTD. INPUT
Made in Korea
❶
RS-232C DVI-D_2
OUTPUT INPUT
OUTPUT
INPUT
ID SELECT
DVI-D_1
M-STB FAN
M-ON S-ON
❹
OUTPUT
INPUT
1.RS-232C
MPDPControl,Firmware
Upgrade,9pinD-sub
2.DVI 1
TMDSSignal
❷
3.DVI 2
TMDSSignal
4.ID Switch
SetIDSwitch
5.AC Input
AC100V~240V,50/60Hz
❸
❺
- 16 -
Set iD Switch Setting
 y ExampleofIDSwitchsetting
- Y oucansetIDwith3rotaryswitchesasshowninthefollowingfigure.
RS-232C DVI-D_2
OUTPUT INPUT
CAUTION OUTPUT
To prevent electric shock,
Do not remove cover. No user serviceable part inside Refer
servicing to qualified service personal.
FCC Verified : Class "A"
INPUT
ID SELECT
DVI-D_1
• Model Name : OPM-4250
• Voltage : AC~100 - 240V OUTPUT
• Current : Max. 4A
• Frequency : 50/60Hz
• Serial No :
PDP
CO., LTD. INPUT
Made in Korea
※ When you set iD of MPDP set, power cable must be disconnected. if power cable is not disconnected
during iD setting, MPDP set may be operated with the previous iD and it may cause abnormal behavior.
※ For stable operation, wait for at least 10 seconds prior to use MPDP control program after the first AC
power connection.
y
LED indication
LED Indication
M-STB FAN
M-ON S-ON
M-STB FAN
S-ON
M-ON
M-STB FAN
M-ON S-ON
M-STB FAN
M-ON S-ON
M-STB FAN
M-ON S-ON
M-ON(Master-ON) : IP Board Master Power On.
FAN : FAN POWER ON, IF Red LED on IP board is turned on, please check FANs.
※ T o protect the product, power can be disconnected automatically when the fan is stopped.
Stand By
M-STB(Master- ) : IP Board Master Ready
S-ON(Slave-ON) : IP Board Slave Ready
Infinitely Expandable
[PDP ID 01]
100digit10digitsingledigit
[PDP ID 15]
100digit10digitsingledigit
ON OFF
Description
No Power.
Internal System Check after Power on.
System ready.
Power ON by MSCS Program.
(M-ON and S-ON LEDs blink every other
second. Power on status)
Power Off by MSCS Program.
(System ready).
- 17 -