Id Setting; Sequential Connection - Orion OLMU-K4650 User Manual

www.oriondisplay.net
3.5.2. Connection of Ethernet Cable
• In case of Ethernet connection, the control PC should be connected to one of monitor sets
with Ethernet cable.For the connection between the monitor sets, they should be
connected with RS-232C cables.
LAN IR RS232C IN RS232C OUT LAN
LAN IR RS232C IN RS232C OUT LAN
LAN IR RS232C IN RS232C OUT LAN
LAN Cable
LAN Cable(Cross Cable or Direct Cable)
(Direct Cable)
HUB or Router
(Wireless & Cable)
LAN Cable
(Direct Cable)
IR RS232C IN RS232C OUT LAN IR RS232C IN RS232C OUT
IR RS232C IN RS232C OUT LAN IR RS232C IN RS232C OUT
IR RS232C IN RS232C OUT LAN IR RS232C IN RS232C OUT
Ethernet control PC
- 24 -
4.

ID Setting

• Refer to the next chapter for OSW use.
• Before ID Setting Using OSW, Make sure that all of the connected MLCD sets are turned on
by clicking "POWER ON" button in Broadcast.

4.1. Sequential Connection

ㆍIt is the sequential RS-232C cable connection according to the order of ID numbers.
ID 1 ID 2
LAN IR RS232C IN RS232C LAN
OUT
ID 4 ID 5
LAN IR RS232C IN RS232C LAN
OUT
ID 7 ID 8
LAN IR RS232C LAN
RS232C IN
OUT
RS-232C
MLCD
Infinitely Expandable
ID 3
IR RS232C RS232C LAN IR RS232C RS232C OUT
IN OUT IN
ID 6
IR RS232C RS232C LAN IR RS232C RS232C OUT
IN OUT IN
ID 9
IR RS232C RS232C LAN IR RS232C RS232C OUT
IN OUT IN
RS-232C
control PC
- 25 -