NewDesign/LastDesign"Setting; Multi-ScreenConfiguration - Orion ODC-10000 User Manual

ORION PDP
5.5. "new design/Last design" setting
 y
WhenComPortissuccessfullyconnected,pop-upwindowfor"Newdesign/Lastdesign"
appears.
New/LastDesignSet
 y
Click"OpenNewDesign"topreparenewconfiguration.
 y
 C lick"OpenLastDesign"togotolastdesignbeforeclosing.


 y
WhentheconnectionissuccessfullycompletedaftersettingComPort,following
Messagedialogisdisplayed.Thedialogwindowwillbedisappearedin1second.                                                                                                                                         

- 30 -
Infinitely Expandable
5.6. Multi-screen configuration
1.
Input the numbers of X and Y
- X is for the number of row and Y is for column.
- X and Y can be selected within the range from 1 to 15. The maximum MLCD quantity of MSCS
control is 100 sets.
- MLCD image of selected numbers of X and Y is displayed in the Screen configuration in one
second after setting the number.
ScreenConfigurationSetting
2.
Select one of input sources from DVI, PC or Video
3.
Execution of the configuration.
- When you click "PLAY"button after selecting input source from Source select and the numbers of
X and Y in MLCD Configuration, the configuration of MLCD is generated as shown in the figure
below.
DVI DVI
DVI DVI
DVI DVI
※ inFO :
- Check the resolution of the input source. It is displayed at the upper right corner of the screen.
- Check the signal. If there is no input signal, "No signal" is displayed.
- 31 -
MLCD
DVI
DVI
DVI