MscsInstruction; IdSetting - Orion OPM-4250 User Manual

OPM-4250 | OPM-4250R
5.7. MSCS instruction
 y Check"ALLPDP"tosenddatatoallconnectedMPDPregardlessofID.
 y OnE PDP :TransmitProtocolCommandtooneMPDP.
 y ALL PDP :TransmittheProtocolcommandsequentiallytoallconnectedMPDPsets.
 y Broadcast :TransmittheProtocolcommandsimultaneouslytoallconnectedMPDPsets.
 y InordertocontrolpowerofspecificMPDP,use"PowerOn/Off"buttonafterselectingthe
specificMPDP.
MPDPControl-PowerOn/Off
Please wait for at least 10 seconds before executing "Power On" command after
the first AC power connection. If not, it may cause abnormal behavior.
Caution
Please disconnect AC power and reconnect in case of abnormal behavior.
5.8. iD Setting
 y IDofMSCS(MultiScreenControlSystem)issetautomatically.
 y TosendacommandtothedesiredMPDPset,selectIDoftheMPDPfromScreenConfiguration.
 y SelectIDusingrightbuttonofthemouse.SelectedIDisdisplayedwithredsquarebox.
ID 1
ID 4
ID 7
ExampleofMPDPIDSetting
(Input signal is DVI, Configuration is 3 by 3)
ID 2 ID 3
ID 5 ID 6
ID 8 ID 9
- 32 -
Infinitely Expandable
5.9. input Select
 y VarietiesofscreenformationsareavailablewithInputselectconfiguration.
 y SelectDVI1orDVI2attheInputSelectmenu.
1
If you select DVI 2 and click Play button at the Input Select menu, the
input source will be changed from DVI 1 to DVI 2.
- In case you do not select a screen and click Play, the input source for the all screen will be
changed.
SelectDVI2attheInputSelectmenu
※ I nput source is not displayed on the MSCS screen, but it is indicated by colors.
(DVI 1: Yellow, DVI 2: Green)
- 33 -